www.vishay.com for technical questions, contact: ff2aresistors@vishay.com document number: 31010 140 revision: 18-mar-10 rcwpm (military m/d55342) vishay dale thick film chip resistors, military/established reliability mil-prf-55342 qualified, type rm features ? fully conforms to the requirements of mil-prf-55342 ? established reliability - verified failure rate; m, p, r, s and t levels ? operating temperature range is - 55 c to + 150 c ? 100 % group a screening per mil-prf-55342 ? termination style b - tin/lead wraparound over nickel barrier ? for mil-prf-32159 zero ohm jumpers, see vishay dale?s rcwpm jumper (military m32159) datasheet ? halogen-free according to iec 61249-2-21 definition notes ? dscc has created a series of drawings to support the need for 0201- sized product. vishay dale is listed as a resource on this drawing as follows: this drawing can be viewed at: www.dscc.dla.mil/programs/milspe c/listdwgs.asp?doctype=dsccdwg (1) continuous working voltage shall be or ma ximum working voltage, whichever is less (2) characteristics: k = 100 ppm/c; m = 300 ppm/c mechanical specifications resistive element ruthenium oxide encapsulation epoxy substrate 96 % alumina termination solder-coated nickel barrier solder finish tin/lead solder alloy standard electrical specifications vishay dale model mil-prf-55342 style mil spec. sheet term. power rating p 70 c w max. working voltage (1) v temperature coefficient (2) ppm/c tolerance % resistance range rcwpm-0502 rm0502 01 b 0.05 40 300 100, 300 2, 5, 10 1, 2, 5, 10 1 to 9.1 10 to 22m rcwpm-550 rm0505 02 b 0.125 40 300 100, 300 2, 5, 10 1, 2, 5, 10 1 to 9.1 10 to 22m rcwpm-5100 rm1005 03 b 0.20 75 300 100, 300 2, 5, 10 1, 2, 5, 10 1 to 5.1 5.6 to 22m rcwpm-5150 rm1505 04 b 0.15 125 300 100, 300 2, 5, 10 1, 2, 5, 10 1 to 5.1 5.6 to 22m rcwpm-7225 rm2208 05 b 0.225 175 300 100, 300 2, 5, 10 1, 2, 5, 10 1 to 5.1 5.6 to 22m rcwpm-575 rm0705 06 b 0.15 50 300 100, 300 2, 5, 10 1, 2, 5, 10 1 to 5.1 5.6 to 22m rcwpm-1206 rm1206 07 b 0.25 100 300 100, 300 2, 5, 10 1, 2, 5, 10 1 to 5.1 5.6 to 22m rcwpm-2010 rm2010 08 b 0.80 150 300 100, 300 2, 5, 10 1, 2, 5, 10 1 to 5.1 5.6 to 22m rcwpm-2512 rm2512 09 b 1.0 200 300 100, 300 2, 5, 10 1, 2, 5, 10 1 to 5.1 5.6 to 22m rcwpm-1100 rm1010 10 b 0.50 75 300 100, 300 2, 5, 10 1, 2, 5, 10 1 to 5.1 5.6 to 22m rcwpm-0402 rm0402 11 b 0.05 30 300 100, 300 2, 5, 10 1, 2, 5, 10 1 to 9.1 10 to 22m rcwpm-0603 rm0603 12 b 0.10 50 300 100, 300 2, 5, 10 1, 2, 5, 10 1 to 5.1 5.6 to 22m rcwpm-0302 rm0302 13 b 0.04 15 300 100, 300 2, 5, 10 1, 2, 5, 10 1 to 9.1 10 to 22m dscc drawing number vishay dale model term. power rating p 70 c w res. range res. tol. % temp. coef. ppm/c max. working voltage (1) v 07009 rcwp-0201 b 0.05 47 to 1m 10 to 1m 1; 5 100 200 30 p x r
document number: 31010 for technical questions, contact: ff2aresistors @vishay.com www.vishay.com revision: 18-mar-10 141 rcwpm (military m/d55342) thick film chip resistors, military/established reliability mil-prf-55342 qual ified, type rm vishay dale note (1) products with space level failure rates ar e only offered in packaging codes with esd overpack and labeling. for all other failu re rates, the esd pack codes are an optional type of packaging. global part number information new global part numbering: m55342m02b10e0rwb (preferred part number format) mil style characteristics spec. sheet termination style value and tolerance failure rate pac k ag i n g (1) special d55342 applies to style 07 (rm1206) only. m55342 applies to all other styles. k = 100 ppm m = 300 ppm (see standard electrical specifications table) b = pre-tinned nickel barrier, wraparound (see tolerance and multipliers table) c = non-er m = 1.0 %/1000 h p = 0.1 %/1000 h r = 0.01 %/1000 h s = 0.001 %/1000 h t = space level tp = tin/lead, t/r (full) tn = tin/lead, t/r (full), w/esd ul = tin/lead, t/r single lot date code s3 = tin/lead, t/r (1000 pieces) sv = tin/lead, t/r (1000 pieces), w/esd wb = tin/lead, tray wa = tin/lead, tray, w/esd wl = tin/lead, tray, single lot date code s2 = tin/lead, t/r (500 pieces) su = tin/lead, t/r (500 pieces), w/esd s6 = tin/lead, t/r (300 pieces) st = tin/lead, t/r (300 pieces), w/esd blank = standard (dash number) (up to 1 digits) t = space level (-98) historical part numberin g: m55342m02b10e0r (will c ontinue to be accepted) m55342 m 02 b 10e0 r wb mil style characteristics spec. sheet termination style value and tolerance failure rate pac k ag i n g code resistance tolerance and multipliers tolerance multiplier value range ( ) 1 % 2 % 5 % 10 % d g j m 1 1 to 9xx e h k n 1000 1k to 9xxk f t l p 1 000 000 1m to 22m examples: 11d3 = 11.3 1 % 10e0 = 10 k 1 % 332d = 332 1 % 2f21 = 2.21 m 1 % 51g0 = 51 2 % 10h0 = 10 k 2 % 33h0 = 33 k 2 % 22t0 = 22 m 2 % 15j0 = 15 5 % 10k0 = 10 k 5 % 560k = 560 k 5 % 8l20 = 8.2 m 5 % 10m0 = 10 10 % 10n0 = 10 k 10 % 2p70 = 2.7 m 10 % 8p20 = 8.2 m 10 % 55342m02 m b10e0 r w b
www.vishay.com for technical questions, contact: ff2aresistors@vishay.com document number: 31010 142 revision: 18-mar-10 rcwpm (military m/d55342) vishay dale thick film chip resistors, military/established reliability mil-prf-55342 qualified, type rm dimensions in inches (millimeters) vishay dale model mil-prf-55342 style mil spec. sheet a (length) b (width) c (height) d (top term) e (bottom term) rcwpm-0502 rm0502 01 0.055 0.005 (1.40 0.13) 0.023 0.003 (0.58 0.08) 0.015 0.003 (0.38 0.08) 0.010 0.005 (0.25 0.13) 0.015 0.005 (0.38 0.13) rcwpm-550 rm0505 02 0.055 0.005 (1.40 0.13) 0.050 0.005 (1.27 0.13) 0.020 0.005 (0.51 0.13) 0.010 0.005 (0.25 0.13) 0.015 0.005 (0.38 0.13) rcwpm-5100 rm1005 03 0.105 0.005 (2.67 0.13) 0.050 0.005 (1.27 0.13) 0.020 0.005 (0.51 0.13) 0.015 0.005 (0.38 0.13) 0.015 0.005 (0.38 0.13) rcwpm-5150 rm1505 04 0.155 0.005 (3.94 0.13) 0.050 0.005 (1.27 0.13) 0.020 0.005 (0.51 0.13) 0.015 0.005 (0.38 0.13) 0.015 0.005 (0.38 0.13) rcwpm-7225 rm2208 05 0.230 0.005 (5.84 0.13) 0.075 0.005 (1.91 0.13) 0.020 0.005 (0.51 0.13) 0.020 0.005 (0.51 0.13) 0.020 0.005 (0.51 0.13) rcwpm-575 rm0705 06 0.080 0.005 (2.03 0.13) 0.050 0.005 (1.27 0.13) 0.020 0.005 (0.51 0.13) 0.016 0.008 (0.41 0.20) 0.015 0.005 (0.38 0.13) rcwpm-1206 rm1206 07 0.125 0.005 (3.18 0.13) 0.063 0.005 (1.60 0.13) 0.020 0.005 (0.51 0.13) 0.015 0.005 (0.38 0.13) 0.015 0.005 (0.38 0.13) rcwpm-2010 rm2010 08 0.197 0.006 (5.00 0.15) 0.098 0.005 (2.49 0.13) 0.020 0.005 (0.51 0.13) 0.020 0.005 (0.51 0.13) 0.020 0.005 (0.51 0.13) rcwpm-2512 rm2512 09 0.250 0.006 (6.35 0.15) 0.124 0.005 (3.15 0.13) 0.020 0.005 (0.51 0.13) 0.020 0.005 (0.51 0.13) 0.020 0.005 (0.51 0.13) rcwpm-1100 rm1010 10 0.105 0.005 (2.67 0.13) 0.100 0.005 (2.54 0.13) 0.020 0.005 (0.51 0.13) 0.015 0.005 (0.38 0.13) 0.015 0.005 (0.38 0.13) rcwpm-0402 rm0402 11 0.039 0.003 (0.99 0.08) 0.020 0.003 (0.51 0.08) 0.013 0.003 (0.33 0.08) 0.010 0.005 (0.25 0.13) 0.010 0.005 (0.25 0.13) rcwpm-0603 rm0603 12 0.063 0.005 (1.60 0.13) 0.032 0.005 (0.81 0.13) 0.018 0.005 (0.46 0.13) 0.012 0.005 (0.30 0.13) 0.015 0.005 (0.38 0.13) rcwpm-0302 rm0302 13 0.034 0.004 (0.86 0.10) 0.021 0.003 (0.53 0.08) 0.013 0.003 (0.33 0.08) 0.007 0.005 (0.18 0.13) 0.008 0.005 (0.20 0.13) rcwp-0201 0.024 0.002 (0.61 0.05) 0.012 0.002 (0.30 0.05) 0.009 0.002 (0.23 0.05) 0.006 0.003 (0.15 0.08) 0.006 + 0.002 - 0.004 (0.15 + 0.05 - 0.10) d c a e b derating curve deratin g - 55 - 25 75 100 125 150 175 120 100 8 0 60 40 20 0 ambient temperature in c 70 rated power in % 050 25 cage code: 91637 and sh903
document number: 91000 www.vishay.com revision: 18-jul-08 1 disclaimer legal disclaimer notice vishay all product specifications and data are subject to change without notice. vishay intertechnology, inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively, ?vishay?), disclaim any and all liability fo r any errors, inaccuracies or incompleteness contained herein or in any other disclosure relating to any product. vishay disclaims any and all li ability arising out of the use or application of any product describ ed herein or of any information provided herein to the maximum extent permit ted by law. the product specifications do not expand or otherwise modify vishay?s terms and conditions of purcha se, including but not limited to the warranty expressed therein, which apply to these products. no license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document or by any conduct of vishay. the products shown herein are not designed for use in medi cal, life-saving, or life-sustaining applications unless otherwise expressly indicated. customers using or selling vishay products not expressly indicated for use in such applications do so entirely at their own risk and agree to fully indemnify vishay for any damages arising or resulting from such use or sale. please contact authorized vishay personnel to obtain written terms and conditions regarding products designed for such applications. product names and markings noted herein may be trademarks of their respective owners.
|
